Auto Sequencing Mode - Leviton DDS6000 Installation And Operation Manual

Auto Sequencing Mode

The DDS 6000 dimmers can be configured to perform stand alone Automatic Sequencing in place of Auto Lamp Test. This is
useful for lighting displays and show windows. The four channels will automatically fade from one to another in a preprogrammed
pattern and time selected by the front panel dipswitch whenever front panel dipswitch #8 is up and no multiplex signal is detected.
The Analog control input will continue to operate while the dimmer is sequencing.
To enable Automatic Sequencing Mode move the switch on the internal configuration dipswitch #2 to OFF.
Front panel Dipswitch sequence settings. (not internal dipswitch)
STEP TIME
1 SECOND
3 SECOND
5 SECOND
10 SECOND
15 SECOND
30 SECOND
45 SECOND
60 SECOND
Dipswitch # 7 on causes all above sequences to ping-pong.
8
SWITCH 1,2,3
OFF,OFF,OFF
ON,OFF,OFF
OFF,ON,OFF
ON,ON,OFF
OFF,OFF,ON
ON,OFF,ON
OFF,ON,ON
ON,ON,ON
Software Revision 1.0 and above, Version C, UL Versions
PATTERN
2 CHAN BUILD
3 CHAN SEQUENCE
3 CHAN BUILD
2&4 CHAN ALT
4 CHAN SEQUENCE
4 CHAN BUILD
4 CHAN BUILD +
4 CHAN RANDOM
DDS 6000 DIMMER PACK
SWITCH 4,5,6
OFF,OFF,OFF
ON,OFF,OFF
OFF,ON,OFF
ON,ON,OFF
OFF,OFF,ON
ON,OFF,ON
OFF,ON,ON
ON,ON,ON
NSI CORPORATION