Disassembly; Disassembly Steps; Storage; Recommissioning - Wieland gesis SPZ User Manual

12

DISASSEMBLY

The complete system distributor must be disassembled for proper disposal. All components can be
separated from the housing using tools.
The components must be disposed of properly depending on the type and material of the compo-
nent.
12.1

Disassembly steps

 Disconnect the system distributor from the power supply.
Danger to life from electric shock
Always observe the 5 safety rules according to VDE 0105:
1. Disconnect from the power.
2. Secure against restart.
DANGE R
3. Establish the absence of any voltage.
4. Earthing and short-circuiting.
5. Cover or fence off adjacent live parts. Disconnect all connectors from the housing.
 Disconnect all electrical and mechanical connections from the housing.
 Detach the system distributor including the mounting plate from the mounting surface using a
suitable tool.
12.2

Storage

Store the system distributor in a dry place protected from mechanical damage until it is commis-
sioned or recommissioned.
12.3

Recommissioning

For information on correct recommissioning, please refer to chapter 9 "Commissioning", p. 15.
Wieland Electric GmbH | BA001298 | 09/2022 (Rev. A)
Disassembly
18