Humzor NEXZSYS NS706 User Manual page 3

⚫
Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
⚫ Keep the test equipment dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to
clean the outside of the equipment as necessary.
⚫ Do not drive the vehicle and operate the test equipment at the same time. Any distraction may cause an
accident.
⚫ Refer to the service manual for the vehicle being serviced and adhere to all diagnostic procedures and
precautions. Failure to do so may result in personal injury or damage to the test equipment.
⚫ To avoid damaging the test equipment or generating false data, make sure the vehicle battery is fully
charged and the connection to the vehicle DLC is clean and secure.
⚫ Do not place the test equipment on the distributor of the vehicle. Strong electro-magnetic interference can
damage the equipment.
3