Wifi Connection - Humzor NEXZSYS NS706 User Manual

5.3 WIFI Connection

After you select the product serial number to enter the "HUMZOR" main interface, you can view and
connect to the VCI device with the corresponding serial number you have purchased through the following
steps:
1. Insert the VCI of the HUMZOR NEXZSYS product you purchased tightly into the OBD port. At this
time, the WIFI icon on the top right side is.
2. Turn on the ignition switch, the NEXZSYS application will automatically scan and recognize the VCI
device, and establish a WIFI connection. At this time, the WIFI icon on the top right-side changes to
the WIFI connection is successful.
3. If the NEXZSYS application cannot automatically connect to your VCI device, or the device fails to
connect, please click the
connected to the car's OBD port.
Figure 5-8 NEXZSYS N
Figure 5-7 Sample Location Permission Prompt Box
icon button on the top right to reconnect, or check whether the VCI is well
ot Connected
Figure 5-9 NEXZSYS Connected
, and
18