Routine Maintenance - Levita LT61B Operator's Manual

Faulty or worn-out parts must always be replaced and not repaired. Only use original
spare parts: The use or non-original and/or incorrectly fitted parts will compromise
the safety of the machine, may cause accidents or personal injuries for which the
Manufacturer is under no circumstance liable or responsible.
this manual must be carried out by your Dealer or a specialized Service Centre. Both
have the necessary knowledge and equipment to ensure that the work is done correctly
without affecting the safety of the machine.
You must go to a specialized Service Centre or contact your Dealer of the following are
malfunctioning:
−
the brake;
−
the engagement and stop of the blade;
−
the drive engagement in forward and in reverse gears.

6.2 ROUTINE MAINTENANCE

6.2.1 Engine
Follow all the instructions in the engine manual.
To drain the engine oil (if the syringe is available):
6.2.2 Transmission and gear unit
These are sealed single units which do not require maintenance. They are permanently
lubricated and this lubricant does not need changing or topping up.
Never use the machine with worn or damaged parts.
Never get rid of used oil, fuel or other pollutants in
unauthorized places!
Any adjustments or maintenance operations not described in
1. unscrew the topping up cap (1);
2. fit the pipe (2) onto the syringe (3) and insert
it right into the hole;
3. using the syringe (3), suck up all the engine oil,
bearing in mind that you need to repeat this
operation a few times before all the oil is
removed.
-93-