Why The Safety Devices Cut In; Preliminary Operations Before Starting Work - Levita LT61B Operator's Manual

described in chapter 4.

5.2 WHY THE SAFETY DEVICES CUT IN

The safety devices work in two ways:
− by preventing the engine from starting if all the safety requirements have not been met;
− by stopping the engine if even just one of the safety requirements is lacking.
a) The engine must only be started in the following conditions:
− the transmission is in "neutral";
− the blade is not engaged;
− the operator is seated.
b) The engine stops when:
− the operator leaves his seat;
− the grass-catcher is lifted without disengaging the blade;
− the blade is engaged without the grass-catcher in place;
− the parking brake is engaged without disengaging the blade;
− the speed change is activated (☛ 4.4) with the parking brake on.

5.3 PRELIMINARY OPERATIONS BEFORE STARTING WORK

These controls ensure that the work gives the best results and is done in maximum safety.
5.3.1 Seat adjustment
Adjust the seat by sliding it along the bracket slots.
1
1
All the references relating to the positions of controls are those
1. Loosen the four screws (1);
2. once you have found the
right position, securely
tighten the four screws (1).
-82-