FujiFilm X-T5 Owner's Manual page 114

N •
Manual focus-point selection is not available when z WIDE/TRACKING
is selected in focus mode S.
•
If j ALL is selected for AF mode, you can rotate the rear command
dial in the focus-point selection display to cycle through AF modes
in the following order: r SINGLE POINT (6 frame sizes), y ZONE
(3 frame sizes), and either z WIDE (focus mode S) or z TRACKING
(focus mode C).
The Focus-Point Display
The focus-point display varies with the option selected for AF
mode.
N
Focus frames are shown by small squares (), focus zones by the large
squares.
r SINGLE POINT r
SINGLE POINT
5
Number of points avail-
able can be selected using
G AF/MF SETTING >
NUMBER OF
POINTS.
88
AF mode AF mode
y ZONE y
Choose from zones with
7 × 7, 5 × 5, or 3 × 3 focus
points.
FOCUS
z WIDE/TRACKING z
ZONE
Position focus frame over
subject you want to track
using continuous AF.
WIDE/TRACKING