AMG AMG210M Series Installation Manual - Hardware

AMG210M PoE Series
Mini Media Converter
Installation Manual - Hardware
amgsystems.com
PACKING LIST
The following items should be included in the box:
• Mini PoE Media Converter
• 52V Power Supply
(with region specific plug)
DC
• Installation & DIP Switch Manual
• SFP Module*
(*only included with some models)
If any of the above items are missing or damaged
please contact your supplier or distributor.
POWER
The mini PoE media converter is powered
by a 48-56V power supply. A DC type
DC
power supply is included with each unit.
The centre pin is positive while the outer sleeve is
negative. The connector type is a 2.1MM input jack.
The power consumption of the AMG210M
mini PoE media converters are detailed below:
• 1Gb Models <3W
(No PoE Load)
• 1Gb Models <33W
(Max PoE Load)
*Excludes SFP Module
The unit supports IEEE 802.3af/at PoE up to 30W
LED INDICATORS
The mini media converters feature LED indicators
to aid in system operation and fault diagnosis. The
meaning of each LED is described in the table below:
POE
TP
L/A
PWR
SPD
FX
L/A
*
*
DUP
D39247-00
On: PoE power is being supplied
Off: No PoE power is being
supplied
Solid: RJ45 is connected but no
data is being received
Flashing: RJ45 is connected and
data is being received
On: Unit is powered up
Off: Unit is not powered up
On: RJ45 is connected at the
highest possible speed
Off: RJ45 is not connected or is
connected at a speed slower than
the highest possible
Solid: SFP is connected but no data
is being received
Flashing: SFP is connected and
data is being received
On: RJ45 is in full duplex mode
Off: RJ45 is in half duplex mode