Siemens RM400 C Series Operating Manual page 23

2
Important notes
Figure 2: Parallel blade plug, tandem blade plug
For units set at 115 V:
Use a parallel blade, grounding type attachment plug rated at 15 A, 125 V (above
plug).
For units set at 230 V (domestic use):
Use a tandem blade, grounding type attachment plug rated at 15 A, 250 V (below
plug).
For units set at 230 V (outside the USA and Canada):
Use a cable set having the minimum AWG as indicated in the table above and a
grounding type attachment plug rated at 15 A, 250 V. The cable set should be
marked HAR and have the appropriate safety approvals for the country in which the
equipment is to be installed.
For the United Kingdom:
If the plug type on the flexible cable is not suitable for your power outlets, do not use
an adapter; instead, remove the plug from the cord and discard. Carefully prepare
the end of the power cable and fit it with a suitable plug.
!
This appliance must be earthed.
13
U24802-J-Z146-2-7600 RM400 C Models