Advertisement
Local Viewing
With the PC and the NVR connected to the same Local Area Network (LAN),
1.
Find the IP address and port number of the NVR (through System Setup >
Network Setup).
2.
Enter the IP address in the browser (e.g., http://192.1.17). If the default port number
has changed from 80, enter the port number as well in the format (e.g., if the port
number was changed to 100 e.g., http://192.1.1.100)
Remote Viewing
1.
Navigate to http://e-seenet.com in a browser.
2.
Input Device ID, username and password to log in.
Advertisement
