Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KHACT3BCAMA
Summary of Contents for Kogan KHACT3BCAMA
-
Page 2: Table Of Contents
Starting the Camera in Standby Mode......................... 13 Connections..................................13 Connecting the AV Output..........................13 Connecting the HDMI Output..........................13 Connecting the Kogan 3+ Action Camera in USB Mode................13 Camera Behaviour................................ 13 Prompt Tones upon Operations........................13 Laser Indicators............................... 14 Turning the TFT Screen ON/OFF........................14 Storage and Playing of Files............................ - Page 3 • you with an exciting video shooting experience This manual describes how to install and use the Kogan 3+ Action Camera. It also provides information about usage, operations, installation precautions and technical specifications of the Kogan 3+ Action Camera. Before using the Kogan 3+ Action Camera, read and understand this manual carefully and keep a copy handy for future use.
- Page 4 The Kogan 3+ Action Camera has the following features: A 170° ultra-wide-angle f/2.8 lens • Special-purpose HD lens, which supports 1080P, 1080i, 960P, and 720P HD video • recording Takes 8M pixels pictures in 3200x2400 resolution • 10X digital zooming •...
- Page 5 26. USB output interface 27. Threaded tripod mount interface The Kogan 3+ Action Camera can be hand-held or used with hands-free accessories. It can be installed in your required location, or after being equipped with a waterproof housing, placed in water for the shooting of underwater scenarios.
-
Page 6: Preparation
Before using the Kogan 3+ Action Camera, complete the following preparations: Power on the Kogan 3+ Action Camera and check the power level a) Turn the power switch to the “ ” position to initiate the system. After the red indicator is on, the corresponding symbols on the LCD screen turns on and then the system enters the preview state. - Page 7 The Micro SD card must be a high-speed card. Before video/audio recording and shooting pictures, format the Micro SD card using the Kogan 3+ Action Camera. If a Micro SD card has been used on other devices, it should also be formatted using the Kogan 3+ Action Camera for normal use.
- Page 8 Bit rate: This parameter can be set to High bit rate ( ) or Normal ( ). If this parameter is set to high, pictures are clearer but the file size increases. Laser SYNC video: Select “ ” to enable the laser indicator, or select “ ” (the default option) to disable the laser indicator.
- Page 9 During the standby period, the Kogan 3+ Action Camera starts working if the Video, Photo, or Stop key is pressed. In factory setting, this parameter is set to OFF.
-
Page 10: Parameter Settings
Note: Use a branded Micro SD card, for example, Transcend Class 10 memory card. Turn the power switch to the ON position to power on the Kogan 3+ Action Camera. At this time, the red indicator is on, and the Kogan 3+ Action Camera changes to the preview state. -
Page 11: Taking A Picture
After setting is complete, the Kogan 3+ Action Camera starts reverse-counting timer when you press the Photo key once. When the preset time is reached, the Kogan 3+ Action Camera takes a picture. To record an audio file, perform the following operations: Press the “... - Page 12 Press and hold the Stop key for two seconds to directly change the video camera to the • ready state for audio only. You can view the recorded audio/video and photo files on the Kogan 3+ Action Camera. To view a file, perform the following operations: Press the “...
- Page 13 A protected file cannot be deleted, but can be deleted by a formatting operation. In the photo file interface, the Kogan 3+ Action Camera can automatically play photos in sequence every five seconds. To automatically play a file, perform the following operations: Enable the playback function, and press “...
-
Page 14: Connections
In standby, no information is displayed on the LCD segment screen. • In the preview state, connect the Kogan 3+ Action Camera to a display device using an AV cable. After being connected to a display device, the Kogan 3+ Action Camera can still implement all its functions. -
Page 15: Laser Indicators
After video recording is complete, you can copy the recorded images to a computer for play by using a USB data cable. You can also remove the Micro SD card from the Kogan 3+ Action Camera and access the image data by using a sensor. The Media Player software is preferred for playing a file. - Page 16 Connecting with an HDMI Cable or an AV Cable,You can play recorded files on a TV set or a monitor that has a HD port, using an HDMI cable to connect the Kogan 3+ Action Camera to the TV set or monitor.
-
Page 17: Waterproof Housing
3. Do not put the waterproof housing in a place where temperature is high (50°C) or low (-10°C) for a long time to avoid deformation. 4. Do not expose the Kogan 3+ Action Camera to sunshine for a long time to avoid deterioration of the waterproof performance. - Page 18 During continuous use, the body temperature of the Kogan 3+ Action Camera increases. This situation is normal. 2. If the Kogan 3+ Action Camera is not used for a long time, remove and maintain the battery properly, and recharge the battery every six months to ensure the battery performance.