Table of Contents
Advertisement
phone
audio or video device
other device
To interrupt the search, select Stop.
3. Select the device with which you want to connect.
4. If the other device requires pairing before data can
be transmitted, a tone sounds, and you are asked
to enter a passcode. The same passcode must be
entered in both devices.
When the connection is established,
data
is displayed.
Tip: When searching for devices, some devices
may show only the unique address (device
address). To find the unique address of your
device, enter *#2820#.
Pair devices
To pair with compatible devices and view your paired
devices, in the main view of Bluetooth connectivity,
scroll right.
Before pairing, create your own passcode (1 to 16
digits), and agree with the owner of the other device
to use the same code. Devices that do not have a user
interface have a factory-set passcode. The passcode is
used only once.
1. To pair with a device, select
paired
device. Devices that are within range are
displayed.
Sending
Options
New
>
2. Select the device, and enter the passcode. The same
passcode must be entered on the other device as
well.
3. Some audio enhancements connect automatically
to your device after pairing. Otherwise, scroll to the
enhancement, and select
audio
device.
Paired devices are indicated by
To set a device as authorised or unauthorised, scroll to
the device, and select from the following options:
Set as authorised
— Connections between your
•
device and the authorised device can be made
without your knowledge. No separate acceptance or
authorisation is needed. Use this status for your own
devices, such as your compatible headset or PC or
devices that belong to someone you trust.
indicates authorised devices in the paired devices
view.
Set as unauthorised
•
this device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options
> Delete.
If you want to cancel all pairings, select
Delete
all.
Receive data using
Bluetooth connectivity
When you receive data through Bluetooth connectivity,
a tone sounds, and you are asked if you want to accept
the message. If you accept,
Options
Connect to
>
in the device search.
— Connection requests from
Options
>
is displayed, and the
65
Advertisement
Table of Contents
