Table of Contents
Advertisement
WPA2 only mode
•
(Advanced Encryption Standard) encryption, select
Off. To allow AES only, select
Wireless LAN plugins
Select
Menu
Ctrl. panel
>
Connection
> Destinations, and an access point
group.
The extensible authentication protocol (EAP) plug-ins
are used in wireless networks to authenticate wireless
devices and authentication servers, and the different
EAP plug-ins make possible the use of various EAP
methods (network service).
You can view the EAP plug-ins currently installed in
your device (network service).
EAP plug-ins
1. To define the EAP plug-in settings, select
New access point
uses WLAN as a data bearer.
2. Select
802.1x
3. Select
WLAN security settings
EAP
EAP plug-in
>
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN
using the access point, select the desired plug-in and
Options
> Enable. The EAP plug-ins enabled for use
with this access point have a check mark next to them.
To not use a plug-in, select
142
— To allow both TKIP and AES
On
Settings
and
>
and define an access point that
or
WPA/WPA2
as the security mode.
WPA/WPA2
>
settings.
Options
> Disable.
To edit the EAP plug-in settings, select
Edit.
To change the priority of the EAP plug-in settings, select
Options
>
in before other plug-ins when connecting to the
network with the access point, or
priority
to use this plug-in for network authentication
after attempting to use other plug-ins.
See the device help for more information on EAP
plugins.
Session initiation protocol
(SIP) settings
Select
Menu
Connection
The session initiation protocol (SIP) is used for creating,
modifying, and terminating certain types of
Options
>
communication sessions with one or more participants
(network service). Typical communication sessions are
video sharing and net calls. SIP profiles include settings
for these sessions. The SIP profile used by default for a
communication session is underlined.
>
To create a SIP profile, select
profile
>
profile.
To select the SIP profile you want to use by default for
communication sessions, select
profile.
Raise priority
to attempt to use the plug-
Options
Ctrl. panel
Settings
>
>
SIP
settings.
>
Options
Use default profile
or
Use existing
Options
Options
>
Lower
>
and
New SIP
>
Default
>
Advertisement
Table of Contents
