Cleaning The Appliance - Chambers CRBR2412-SR Detailed Instructions For Use

CLEANING THE APPLIANCE

Before cleaning, unplug the appliance from the power mains – switch off the appliance (see chapter
switching the Appliance On/Off) and unplug the power cord from the wall outlet.
• Use a soft cloth to clean all surfaces. Cleaners that contain abrasive substances, acids, or
solvents are not suitable for cleaning as they may damage the surface.
Clean the appliance exterior with water or a mild solution of suds. Lacquer-coated and
surfaces may be cleaned with lukewarm water to which you have added a mild detergent. Use of
cleaners with low alcohol content is allowed (e.g. window cleaners).
Do not use cleaners containing alcohol for cleaning plastic materials.
Appliance interior can be cleaned with lukewarm water to which you can add
www.chambers-appliances.com
• A gutter and an opening through which the
water from thawed ice flows are located
underneath the cooling panel that cools the
refrigerator interior. The gutter and the opening
may not be clogged. Inspect them often and
clean if necessary (e.g. with a plastic straw).
• Frost or ice build-up, 3-5 mm thick, will
increase power consumption. Therefore, it
should be regularly removed (does not apply
to NO FROST freezer). Do not use any sharp
objects, solvents, or sprays.
• The condenser unit mounted on the
(exterior) back wall should always be kept
clean, free of dust or deposits resulting from
kitchen smoke or fumes.. Occasionally
clean the dust using a soft non-metal brush
or a vacuum cleaner.
• After cleaning, switch the appliance back on
and insert the food.
aluminum
some vinegar.