Table of Contents
Advertisement
APPLIANCE INTERIOR EQUIPMENT
(* Equipment depends on the model)
SHELF
WIRE BOTTLE RACK*
ELASTIC BOTTLE MAT*
16
1
2
• For easier access to food and clarity, the
shelves can be partly pulled out.
• The shelves may be
preferences using the guides in the
refrigerator interior. To remove a shelf from
the refrigerator, pull it out
is stopped by the guide. Then, lift it slightly
at the front part and pull it all the way out.
Store perishables at the back of the shelf
where the temperature is the lowest.
• Some models also feature a wire bottle holder.
The bottle holder is protected against being
inadvertently pulled out It can only be pulled
out when it is empty. To pull it out, lift is slightly
at the back and pull it towards you. Place the
bottle holder so that the length of the bottles
does not prevent proper closing of the door.
The holder can take a maximum load of 9
0.75-liter bottles or 13 kilograms of total
weight – see label on the right side in the
appliance interior.
• Cans may also be placed on the bottle
rack (lengthwise or crosswise).
• Some models feature an elastic mat on
which bottles or cans can be placed.
• The mat can also be used as a trivet for hot
pans.
adjusted to
suit your
to the point
when it
Advertisement
Table of Contents
