Table of Contents
Advertisement
• The appliance may stand alone, or it may be placed
clearance required to fully open the door to allow pulling out the drawers and shelves (see
installation diagram).
CONNECTING THE APPLIANCE
• Connect the appliance to the power mains using a connection cable. The wall outlet should be
fitted with a ground contact (safety socket). Nominal voltage and frequency are indicated on the
rating plate/label with basic information on the appliance.
• The appliance must be connected to the power mains and grounded in compliance with the
effective standards and regulations. The appliance will withstand short-term deviations from
the nominal voltage, but not more than +/- 6%.
10
next to a
cupboard or a wall. Consider the
600 mm
ma
x
90
°
710 mm
min 50 mm
Advertisement
Table of Contents
