Changing Basic Settings; Cleaning And Servicing; Cleaning The Tub - Siemens SL63HX61CE User Manual

en Cleaning and servicing
Basic setting
TimeLight
Tone volume
Factory setting
1
Factory setting (may vary according to model)

Changing basic settings

Open the appliance door.
1.
Press ⁠ .
2.
To open the basic settings, press
3.
for 3 seconds.
a The display shows Hxx.
a The display shows
Press
4.
the display shows the required set-
ting.
Press repeatedly until the dis-
5.
play shows the right value.
You can change several settings.
To save the settings, press
6.
for 3 seconds.
Close the appliance door.
7.
34
Display text Selection
1
S01 S00 - S01
1
b02 b00 - b03
rE YES
⁠ .
repeatedly until
Description
Switch TimeLight on or off.
While the programme is running,
status information is projected onto
the floor below the appliance door
relating to timer programming, the
programme or the time remaining. If
the base panel is pulled forwards or
if the appliance is installed at eye
level with the cabinet front fitted
flush, the display is not visible.
Level "S00" switches TimeLight off.
Adjustment of tone volume.
Level "b00" switches the signal tone
off.
Restore changed settings to the fact-
ory settings.
The settings for initial start-up must
be configured.

Cleaning and servicing

Cleaning and servicing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.

Cleaning the tub

WARNING
Risk of harm to health!
Using detergents containing chlorine
may result in harm to health.
Never use detergents containing
▶
chlorine.
Remove any coarse soiling in the
1.
interior with a damp cloth.
Add detergent to the detergent dis-
2.
penser.
Select the programme with the
3.
highest temperature.
→ "Programmes", Page 17
"Start the programme without
4.
tableware." → Page 31