Table of Contents
Advertisement
en Troubleshooting
Fault
Remnants of food on table-
ware.
Detergent residue in the ap-
pliance
42
Cause
Tableware is placed too
close together or basket is
overfilled.
Spray arm rotation is
blocked.
Spray arm nozzles are
blocked.
Filters are soiled.
Filters are inserted incor-
rectly and/or not engaged.
Washing programme selec-
ted too weak.
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
Tall narrow receptacles in
corner areas are not rinsed
adequately.
Top baskets on right and left
are not set to same height.
Lid of the detergent dis-
penser is blocked by items
of tableware parts and will
not open.
The lid of the detergent dis-
penser is blocked by the tab
and will not open.
Troubleshooting
Arrange tableware with sufficient
1.
space in between.
The spray jets must reach the sur-
faces of the tableware.
Avoid points of contact.
2.
Arrange tableware so that it does
▶
not obstruct spray arm rotation.
Clean the "Spray arms" → Page 37.
▶
Clean the filters.
▶
→ "Cleaning filters", Page 36
Insert the filters properly.
1.
→ "Filter system", Page 36
Engage the filters.
2.
Select a more intensive washing
▶
programme.
→ "Programmes", Page 17
Only remove large remnants of food
▶
and do not prerinse tableware.
Do not position tall narrow recept-
▶
acles at too great an angle or in
corner areas.
Set the top baskets on the left and
▶
right to the same level.
Arrange tableware in the top basket
1.
tableware so the tab collecting tray
is not obstructed by tableware.
→ "Arrange tableware", Page 29
Items of tableware are blocking the
dispenser lid.
Do not place tableware or fra-
2.
grance dispensers in the tablet col-
lecting tray.
Position the tab in the detergent dis-
▶
penser crosswise, not vertically.
Advertisement
Table of Contents
