Mercedes-Benz A Series Owner's Manual page 160

Connector
1
Lever
2
Cable box
3
Swing lever 2 forwards and pull upwards.
X
The seat slides out of the front mounting
cups.
Take hold of the seat at the back of the
X
backrest and at the front edge of the seat
cushion.
Guide the seat through the front-passenger
X
door opening.
Open cable box 3 and place connector
X
1 inside.
Close cable box 3.
X
G Risk of injury
The front-passenger seat which has been
removed contains an active sidebag. Do not
attach a power source to the connector on
the seat, otherwise the airbag could inflate.
Store the seat out of the reach of children.
Fitting the front-passenger seat
G Risk of injury
The mounting cups must be free from dirt
and other items in order for the front-
passenger seat to engage securely.
You must connect up the connector, so that
the front-passenger airbag can deploy in
the event of an accident.
If it is not connected and the engine is run-
ning, the 5 PASSENGER AIRBAG OFF
warning lamp flashes and the 1 warning
lamp lights up after a short time.
Loading and stowing
Rear mounting cups
1
Front mounting cups
2
Connector
3
Cable box
4
Lever
5
Seat frame
6
Take connector 3 out of cable box
X
place it at the front.
Take hold of the seat at the back of the
X
backrest and at the front edge of the seat
cushion.
Controls
4 and
Z
157