Mercedes-Benz A Series Owner's Manual page 109

Controls
On-board computer
The direction of travel 1 appears in the multi-
function display.
Route guidance active
The multi-function display shows navigation
instructions, for example:
106
Message memory menu
Previous display messages can be called up
in the Message memory menu. The Mes-
sage memory menu is visible only when
there is a display message.
i
Please refer to the menu overview
( page 101).
Y
G Risk of accident
The on-board computer only records and
displays messages and warnings from cer-
tain systems. For this reason, you should
always make sure that your vehicle is safe
to drive. You could otherwise cause an acci-
dent by driving an unsafe vehicle.
i
All possible display messages are
explained in the "Practical advice" section
( page 202).
Y
Switching off the ignition clears all display
messages except for the highest priority dis-
play messages. When the causes of the high-
priority display messages are rectified, these
display messages will be erased.
Displaying messages
Use the buttons on the multi-function steer-
ing wheel.
Press the è or · button repeatedly
X
until either the original menu or the Mes-
sage memory menu appears.
When there are display messages, 2 mes-
sages appears in the multi-function dis-
play, for example.
Use the j or k button to scroll
X
through the display messages.
Settings menu
In the Settings menu, you will find the Set-
tings To reset Press reset button for
3 seconds function, with which you can
restore most settings to the factory settings.
You will also find submenus with which you
can make individual settings for your vehicle.
i
Please refer to the menu overview
( page 101).
Y
Use the buttons on the multi-function steer-
ing wheel.
Resetting to factory settings
For safety reasons, not all functions will be
reset: permanent Speedtronic* can only be
set in the Vehicle submenu. The Settings
Headlamps function in the Lighting sub-
* optional