Mercedes-Benz A Series Owner's Manual page 155

Controls
Loading and stowing
Seat cushion
1
Fold left or right seat cushion
X
Release handle
2
Seat cushion
3
152
Grasp release handle
X
ion 3 upwards.
Remove seat cushion 3.
X
1 forwards.
Hinge
4
If the backrest is to be removed: fold down
X
hinge 4.
If the backrest is only to be folded down:
leave hinge 4
in the position shown above.
i
Vehicles with TIREFIT kit:
You can stow the seat cushions under the
variable luggage compartment floor*.
Vehicles with emergency spare wheel:
You can stow a seat cushion under the var-
iable luggage compartment floor*.
2 and pull seat cush-
as a support for the backrest
!
Vehicles with emergency spare wheel*,
loud speaker system* or sound system*:
You cannot stow any seat cushions under
the variable luggage compartment floor*.
Fitting rear seat cushions*
Fold hinge 4 upwards if necessary. Only
X
then can the seat cushion be slid in.
Slide the seat cushion onto the fixtures
X
until it engages.
i
For easier alignment of the cushions,
observe the arrows on the rear of the seat
cushions.
Swing the seat cushion back.
X
Removing the backrests*
Fold the seat cushion forwards
X
( page 151).
Y