Mercedes-Benz A Series Owner's Manual page 116

Resetting
Using è or ·, select From start.
X
Press the j or k button to select the
X
function that you wish to reset.
Press and hold the reset button on the left
X
of the instrument cluster until the values
have reverted to "0".
Calling up the range
Using è or ·, select From start.
X
Press the j or k button to select
X
Range:.
The multi-function display shows the esti-
mated range of the vehicle, based on the
current driving style and the fuel level. If
there is only a small amount of fuel remain-
ing in the fuel tank, a vehicle refuelling
¿ appears instead of the range.
* optional
Telephone menu*
Functions and displays depend on the
optional equipment installed in your vehicle.
You can place your mobile phone in the
mobile phone bracket* ( page 164), or set
Y
up a Bluetooth connection to the audio sys-
tem* or COMAND APS* (see separate oper-
ating instructions).
G Risk of accident
You must observe the legal requirements
for the country in which you are currently
driving when operating a mobile phone in
the vehicle.
If it is permitted to operate a mobile phone
while the vehicle is in motion, only operate
it when road and traffic conditions permit.
You could otherwise be distracted from the
traffic conditions, cause an accident and
injure yourself and others.
i
Please refer to the menu overview
( page 101).
Y
Use the buttons on the multi-function steer-
ing wheel.
On-board computer
Switch on the mobile phone and audio
X
equipment* or COMAND APS* (see sepa-
rate operating instructions).
Press the è or · button to select the
X
Telephone menu.
Mobile phone on
PIN code not yet entered
Once you have inserted the mobile phone into
the mobile phone bracket*, the multi-func-
tion display shows the PIN display message.
Enter the PIN using the mobile phone, Lin-
X
guatronic*, the audio system* or COMAND
APS*.
The mobile phone will search for a network.
Mobile phone operational
You will see Ready or the name of the mobile
phone network provider in the multi-function
display. If the operational readiness symbol
of the mobile phone goes out, your vehicle is
outside the transmission and reception
range. In this case you will see No Service
in the multi-function display.
Controls
Z
113