Displaying Next/Previous Image; Image Rotation; Switching The Folders; Exiting Stop/Play Mode - TechniSat DiGYBOXX HD CX Manual

7.20.1 Displaying next/previous image

> Use the up/down arrows to go to the next or previous image.

7.20.2 Image rotation

> Pressing the blue or red function key moves the image to the right or to the left.

7.20.3 Switching the folders

> Press Stop in playback mode to activate Navigator once again.
> To go to a higher level folder, use the arrows to select the highest line marked with the
and press OK
or
> Press the Back button.

7.20.4 Exiting stop/play mode

> To stop the fi le playback and return to normal mode, press TV/Radio.

7.20.5 Slideshow

Images can be viewed in a slideshow. This function allows the user to view a series of images that are
displayed automatically.

7.20.5.1 Starting slideshow

> Load Image Navigator.
> Use the up/down arrows to select the JPG fi le that is to start the slideshow.
> Pressing the yellow function key Slideshow activates the automatic display of all successive images
of a given folder or a playlist, starting with the selected image.

7.20.5.2 Pause

> Pressing Pause/Play stops fi le playback (Pause).
The Pause symbol will appear on the screen.
> Pressing the button again starts playback mode again.
7.20.5.3 Displaying next/previous image
> Use the up/down arrows to proceed to the next or previous image.

7.20.5.4 Adjusting the rate of switching images

> Use the right/left arrows to set the rate of switching images from 5 to 100 seconds.
Remember that with fi les of greater size and shorter switching time it is not possible to view the ima-
ge in the set switching time. If the switching time is too short for a fi le of a certain size, the image will
be displayed after it has been fully loaded.
7.20.5.5 Image rotation
> Pressing the blue or red function key moves the image to the right or to the left.
75
symbol