Programming The 328I - Crime Guard 328i2 Installation Manual

Hide thumbs

Table Of Contents

Table of Contents

Up to 4 different remote controls and 20 features may be programmed into the

security system's memory through the programing mode. To enter the

programming mode follow the three steps listed below. Once in programming

mode, Press & Release the Easy Valet switch the number of times equal to the

number of the feature to be programmed. The siren will emit a number of chirps

equal to the number of the feature to confirm that the desired feature has been

selected.

Once selected, the feature's setting can be chosen by Pressing the appropriate

button on the remote control. It is possible to "toggle" the feature's setting back

and forth until either a different feature is selected or programming mode is

exited. Features can be selected in any order, but it is always necessary to enter

the feature's number into the Easy Valet switch by Pressing the Easy Valet

switch the number of times equal to the number of the feature. (Refer to pages

#19-21 for explanation of features)

For Example: If the user desires to program feature #15 then feature #3:

a) First enter the programming mode.

b) To access feature #15 (Automatic Rearm On/Off), Press the Easy Valet

Switch 15 times. The siren will emit 15 chirps to confirm selection.

c) Next, Press the appropriate remote control button to choose feature #15's

setting. The siren will chirp to confirm.

d) To access feature #3 (Chirp Confirmation On/Off), Press the Easy Valet

Switch 3 times. The siren will emit 3 chirps to confirm selection.

e) Press the appropriate remote control button to choose the feature #3's

setting. The siren will chirp to confirm.

f) Follow the same procedure to select any other feature for programming.

g) Exit programming mode when finished.

To Enter Programing Mode:

Step 1: Turn the vehicles's ignition "On".

Step 2: Turn the vehicle's ignition "Off".

Step 3: Press & Release the Easy Valet switch 5 times.

-The siren will chirp to confirm entry into the programing mode.

To Exit Programing Mode: Turn the vehicles's ignition "On".

- The siren will chirp to confirm exit from programming mode.

the system will automatically exit programming mode. The siren will chirp to

confirm exit from the programming mode.