schmersal AZ15-B1 Instruction For Operation Manual

INSTRUCTIONS FOR OPERATION AND
ASSEMBLY
ACTUATOR AZ15/16-B1 TEST
Table of Contents

0.1 Purpose

0.2 Mounting instructions

0.1 Purpose
The actuators are preferably used on safety guards in conjunction with the AZ 15 or AZ 16 safety switches.
There are different actuator types available.
The actuators AZ 15/16-B1 are preferably used for sliding and removable safety guards.
For hinged guards, the AZ 15/16-B2, -B3 and -B6 actuator.
0.2 Mounting instructions
When the switch is fitted on a hinged safety guard, please ensure that the point of rotation is located within the range
of the upper surface of the safety switch, in which the actuator hook is inserted (refer to table).
Use tamper-proof screws to prevent unauthorised removal of the switch; these screws are available as an accessory. Please
F
observe that, when fixing the switch e.g. by means of rivetting or welding, the insertion depth of the actuator is not modified.
Actuating radii [mm]
AZ 15/16-B2
AZ 15/16-B2-1747
AZ 15/16-B3
AZ 15/16-B3-1747
AZ 15/16-B6
over the small edge of the actuator
Rmin
-
-
32
32
25
over the wide edge of the actuator
d R
-
-
11
11
11
min
45 11
45 11
-
-
38 11
d
-
-