Table of Contents
Advertisement
HP 16532A - Installation
2-7. Operating Environment
The operating environment is listed in table 1-2 of
Section I of this manual. Note should be made of
the non-condensing humidity limitation.
Condensation within the instrument can cause
poor operation or malfunction. Protection should
be provided against internal condensation.
The HP 16532A Oscilloscope Module will operate
at all specifications within the temperature and
humidity range given in table 1-2. However,
reliability is enhanced when operating the module
within the following ranges.
Temperature: + 20 °C to + 35 °C (+ 68 °F to
•
+ 95 °F)
•
Humidity: 20% to 80% non-condensing
2-8. Storage
The module may be stored or shipped in
environments within the following limits:
Temperature: − 40 °C to + 75 °C
•
•
Humidity: Up to 90% at 65 °C
•
Altitude: Up to 15,300 meters (50,000 feet)
The module should also be protected from
temperature extremes which cause condensation
on the instrument.
2-4
2-9. Packaging
The following general instructions should be used
for repacking the module with commercially
available materials.
•
Wrap the module in antistatic plastic.
•
Use a strong shipping container. A double-
walled carton made of 350-lb test material is
adequate.
•
Use a layer of shock-absorbing material 70 to
100 mm (3- to 4-inch) thick around all sides of
the module to provide firm cushioning and to
prevent movement within the container.
•
Seal the shipping container securely.
•
Mark the shipping container FRAGILE to en-
sure proper handling.
•
In any correspondence, refer to the module
by its model number and serial number.
2-10. Tagging for Service
If the module is to be shipped to a
Hewlett-Packard sales office for service or repair,
attach a tag showing owner (with address),
complete serial number, and a description of the
service required.
Advertisement
Table of Contents
