Removing the control-panel module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you read the
2.
Follow the procedure listed in
CAUTION: Do not use excessive force when removing the control panel as it can damage the
connectors.
Steps
1.
Remove the screw(s) securing the control-panel module to the chassis.
2.
Remove all the cables connecting the control-panel module to the chassis.
Figure 29. Removing and installing the control panel module—four hard-drive chassis
1.
control-panel module
3.
control-panel module connector cable
5.
USB connector cable
Safety
instructions.
Before working inside your
system.
2.
control-panel module screws (2)
4.
display module cable
85