Table of Contents
Advertisement
Number of Cores
Controls the number of enabled cores in each processor. This option is set to All
per Processor
by default.
Processor 64-bit
Specifies if the processor(s) support 64-bit extensions.
Support
Processor Core
Specifies the maximum core frequency of the processor.
Speed
Processor 1
The following settings are displayed for each processor installed in the system:
Family-Model-
Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores
SATA Settings details
The SATA Settings screen details are explained as follows:
Embedded SATA
Enables the embedded SATA option to be set to Off, ATA, AHCI, or RAID modes.
This option is set to AHCI by default.
Security Freeze
Sends Security Freeze Lock command to the Embedded SATA drives during POST.
Lock
This option is applicable only for ATA and AHCI modes.
Write Cache
Enables or disables the command for Embedded SATA drives during POST.
Port A
Sets the drive type of the selected device. For Embedded SATA settings in ATA
mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS
support.
For AHCI or RAID mode, BIOS support is always enabled.
Model
Drive Type
Capacity
Port B
Sets the drive type of the selected device. For Embedded SATA settings in ATA
mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS
support.
For AHCI or RAID mode, BIOS support is always enabled.
NOTE: Depending on the number of installed CPUs, there may be up to four
processor listings.
NOTE: Depending on the number of CPUs, there may be up to four
processors listed.
Specifies the family, model, and stepping of the processor
as defined by Intel.
Specifies the brand name.
Specifies the total L2 cache.
Specifies the total L3 cache.
Specifies the number of cores per processor.
Specifies the drive model of the selected device.
Specifies the type of drive attached to the SATA port.
Specifies the total capacity of the hard drive. This field is
undefined for removable media devices such as optical
drives.
27
Advertisement
Table of Contents
Troubleshooting
