Dell PowerEdge C8220X Installation Manual page 14

15
Align the left air baffle with the screw holes on the back of the sled cover.
16
Secure the left air baffle to the sled cover using the two M3 screws. Tighten the screws to
5.21 in-lb.
17
Route the cables along the inside wall of the sled cover.
18
Secure the cables to the retaining clips.
Figure 1-16. Installing the Left Air Baffle
1 left air baffle
3 power and emergency throttling cables
19
Replace the top cover.
20
Close the sled.
21
Replace the sled in the server enclosure.
14
2
1
2
4
4
M3 screws (2)
retaining clips (3)
3