Dell PowerEdge C8220X Installation Manual page 12

7
Align the right air baffle with the screw holes on the back of the sled cover.
8
Secure the right air baffle to the sled cover using the two M3 screws. Tighten the screws to
5.21 in-lb.
Figure 1-12. Installing the Right Air Baffle
1 M3 screws (2)
9
Align the front mounting bracket with the screw holes on the left of the GPGPU card and
secure with two M3 screws. Tighten the screws to 5.21 in-lb.
10
Align the back mounting bracket with the screw holes on the right of the GPGPU card and
secure with two M3 screws. Tighten the screws to 5.21 in-lb.
Figure 1-13. Installing the Mounting Brackets
1 M3 screws (4)
3 Tesla K20 GPGPU card
12
1
2
1
2
2 right air baffle
3
2 front mounting bracket
4 back mounting bracket
4