Lenovo ThinkPad T61 7659 User Manual page 38

Starting BIOS Setup Utility
4. Click Access BIOS. The System Restart Required window is displayed.
5. Click Yes. The computer restarts, and the BIOS Setup Utility menu
6. Using the cursor keys, move to an item you want to change. When the
7. Change the items you wish to change. To change the value of an item, use
8. Press F3 or Esc to exit from the submenu. If you are in a nested submenu,
9. Select Restart; then press Enter. Move the cursor to the option you want
28
®
ThinkPad T61 Service and Troubleshooting Guide
appears.
If you have set a supervisor password, the BIOS Setup Utility menu
appears after you enter the password. You can start the utility by pressing
Enter instead of entering the supervisor password; however, you cannot
change the parameters that are protected by the supervisor password. For
more information, see the on-board help.
item you want is highlighted, press Enter. A submenu is displayed.
the F5 or F6 key. If the item has a submenu, you can display it by pressing
Enter.
press Esc repeatedly until you reach the BIOS Setup Utility menu.
Note: If you need to restore the settings to their original state as of the
time of purchase, press F9 key to load the default settings. You can also
select an option in the Restart submenu to load the default settings or
discard the changes.
for restarting your computer; then press Enter. Your computer restarts.