The Schedule Recording/Timeshift Function Isn't Working; Anynet+ (Hdmi-Cec) Isn't Working - Samsung UE55KU6500UXZT E-Manual

The Schedule Recording/Timeshift Function Isn't Working

When Timeshift or Schedule Recording aren't working, these steps may help resolve the problem.
The problem
Schedule Recording cannot be
used.

Anynet+ (HDMI-CEC) Isn't Working

When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
The problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting
to Anynet+ device..." or
"Disconnecting from Anynet+
device" appears on the screen.
The Anynet+ device won't
play.
The connected device is not
displayed.
Check if there is a USB device connected to the TV.
Recording will automatically stop if the signal becomes too weak. The
Timeshift function will not work if there isn't enough storage space on the
USB device.
Confirm that the device is an Anynet+ device. The Anynet+ system supports
Anynet+ devices only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)) and see if
Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ may not function when some other functions are active, including
Channel Search, Smart Hub, Plug & Play, etc.
If you have disconnected and then reconnected the HDMI cable, scan for
devices again or turn your TV off and on.
Check if the Anynet+ device is properly connected to the TV, and then select
the Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)) menu to see if
Set Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)) to Off.
You cannot use the remote control when the TV is configuring Anynet+
or switching to a viewing mode. Use the remote control after the TV has
completed the Anynet+ configuration or has switched to a viewing mode.
You cannot use the play function when
Check whether the device supports Anynet+.
Check whether the HDMI cable is properly connected.
Go to Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)) and see if
Scan for Anynet+ devices again.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure
the device is connected to your TV with an HDMI cable. Some HDMI cables may
not support Anynet+.
If the connection is terminated because there has been a power failure or the
HDMI cable has been disconnected, please scan for the device again.
Try this!
Try this!
( Settings System
Anynet+ (HDMI-CEC)
( Settings System
Anynet+ (HDMI-CEC)
( Settings System
Start Setup
( Settings System
Anynet+ (HDMI-CEC)
Expert Settings
has been set to On.
Expert Settings
is set to On.
Expert Settings
is in progress.
Expert Settings
has been set to On.