Condensation Container - Siemens WQ33G2CIDN User Manual And Installation Instructions

Table of Contents

Advertisement

Clean the filter mat thoroughly un-
5.
der warm, running water and
squeeze it out by hand.
You can remove heavy soiling
carefully using a vacuum cleaner.
Do not clean the filter mat using
cleaning products.
Push the filter mat onto the retain-
6.
ers.
Ensure that the cleaned filter mat
is not deformed, damaged or in-
verted when you push it onto the
retainers.
Note: You can order the filter mat
→ Page 28 as a spare part from
customer service.
Close the base unit → Page 39.
7.
12.11 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Note: Operate this appliance using
the water drain hose provided. If you
connect the water drain hose
→ Page 14, you do not have to regu-
larly empty the condensation con-
tainer → Page 33.
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
¡ The display shows the following
after drying: "End"
¡ or during operation:
Pull out the condensation con-
1.
tainer, keeping it level.
operation en
.
33

Advertisement

Table of Contents
loading

Table of Contents