Lenovo ThinkPad R60 9457 Hardware Maintenance Manual page 70

Removing and replacing a FRU
Lift the left edge of the palm rest a little in the direction shown by arrow 2 , and
then lift the palm rest from the computer in the direction shown by arrow 3 .
Note: Step 4 and 5 are only for R60.
When installing:
1. Attach the touch pad connector to the system board firmly.
64
MT 0656, 0657, 0658, 0659, 9455, 9456, 9457, 9458, 9459, 9460, 9461, 9462, 9463, 9464
2
Note: Make sure that the connector is attached as in the figure above.
(continued)
3
3
4
5
1