Removing and replacing a FRU
When installing: Make sure the connectors are attached firmly, and that the cables
In step 16 , loosen the hex screws.
When installing: When attaching the system board to the frame, adjust the
(continued)
100
MT 0656, 0657, 0658, 0659, 9455, 9456, 9457, 9458, 9459, 9460, 9461, 9462, 9463, 9464
are routed as in the figure above.
Step
Screw (quantity)
14
M2 × 10 mm, flat-head, nylon-coated (3)
15
M2 × 3.5 mm, big flat-head, nylon-coated (3)
placement with the small projection a . Then secure the system
board with the screws.
14
14
15
15
15
14
a
16
16
Color
Torque
Black
0.167 Nm
(1.7 kgfcm)
Black
0.167 Nm
(1.7 kgfcm)