Activating The Drive Function; Using Audible Cues; Operating The Lights; Operating The Hazard Lights - Invacare LiNX REM110 User Manual

LiNX® Control System

6.3 Activating the Drive Function

1. Press the Drive function key A.
The remote switches to drive function, the Drive function
indicator C shows the preselected drive function (1, 2 or 3) and
the wheel in the drive status display lights up green.
2. Press the Drive function selector keys A or B until the
desired drive function lights up.
The Drive function indicator C shows the drive function.
Drive Drive
function 1 function 2
Use the Drive function selector key to select among
three drive functions that are configured by Invacare
and can be customized by the provider.

6.4 Using Audible Cues

Audible cues are sounds played through the remote speaker in
response to certain system events or navigation actions
performed by the user. They are designed to help users
understand what function or profile they are using and are
especially beneficial for:
users with impaired vision or users who cannot
l
see the display
users who want additional feedback from their actions
l
without the need to constantly monitor the display
Audible cues are available only on REM200-series
remotes.

6.5 Operating the Lights

If you drive outside, turn on the position lights in bad
visibility conditions or darkness.
17
1. Short press the Light button A.

6.6 Operating the Hazard Lights

1. Short press the Hazard lights button A.
Drive

6.7 Operating the Turn Signals

function 3

6.7.1 Use the Left Turn Signal

1. Press the Hazard lights button A for more than three
2. To turn off the left turn signal, short press the Hazard

6.7.2 Use the Right Turn Signal

1. Press the Light button B for more than three seconds.
2. To turn off the right turn signal, short press the Light
The lights turn on or off.
The hazard lights turn on or off.
seconds.
The left turn signal turns on.
lights button again.
The right turn signal turns on.
button again.
60126083-B