Scroll Matching; Alarm Outputs; Alarm No; Alarm Trigger - AVE VSI-Pro Max Operation Manual

SCROLL MATCHING

Scroll Matching is a feature to better remove those advertising scrolling messages on the customer display of cash
registers so they do not clutter up the video display and recording.
SCROLL MATCHING
Choices; Off, Scroll, Two Lines
TIMEOUT
Choices; Off, 3s, 5s, 10s, 15s
The Scroll Matching feature handles two types of advertising messages, single or two line scrolling messages. A single
line scrolling message is where the advertisment is on only the top line or a single line of the customer display. It
basically scrolls from left to right to alert the customers of promotions or the store name. Sometimes a single line
message has the Time/Date on the second which is accomodated by this feature. A two line customer display can also
be scrolling but scrolls together both lines together from left to right and can have Time & Date intermixed as well. In
either case the Time & Date is displayed along with any normal transactions occuring at any time in the scrolling
advertising message. Therefore when messages are scrolling on one line set "Scroll Matching" for "Scroll". For messages
scrolling on two lines set "Scroll Matching" for "Two lines".
Advertising messages also scroll at different speeds depending on the POS or Cash register and size of customer
display. Therefore a "TimeOut" setting is required to make sure that the software gives the display enough time to scroll
three lines so the filtering can properly detect the full message and delete it correctly. First set for "3s" but if the scrolling
display is slower than this and the message is not fully and reliably deleted increase the time until satisfactory results
occur.
TRANS TIMEOUT OFF, 3s, 6s, 10s, 30s, 60s, 180s, 300s
The Transaction Timeout allows you to trigger an alarm condition if a transaction does not occur for a programmable
period of time. When used in combination with the trigger text can implement a watchdog timer for external applications.
5.8

ALARM OUTPUTS

To access alarm output, press the "Up" or "Down" button to move the cursor to "ALARM OUTPUTS" and press "Set". The
following sub-menu will appear:
NOTE: The ALARM OUTPUTS menu controls not only the formatting of the external alarms but also the format-
ting of the on-screen flags assigned to individual exceptions.
VSI-Pro Max POS / Cash Register Interface
SCROLL MATCHING
TIMEOUT
EXIT
Figure 163: Scroll Matching Sub Menu

ALARM NO.

ALARM SYNC

ALARM TRIGGER

NORMAL STATE

ALARM DURATION
FLAG TYPE
FLAG DURATION
TRIGGERED TEXT
VIDEO LOSS
ALARM TYPE
EXIT
Figure 164: ALARM OUTPUTS Sub-Menu
57
5. PROGRAMMING
OFF
3S
1
OFF
EX 1
NO
20
FLASH *
010
OFF
DWELL