Disconnecting Charging Connector In Emergency; Ac Charge - Hyundai ioniq5 2023 Owner's Manual

Disconnecting Charging
Connector in Emergency
If the charging connector does not
disconnect from the charging inlet due to
battery discharge and failure of electric
wires, open the tailgate and slightly pull
the emergency cable in the cargo
area. The charging connector will be
disconnected from the charging inlet.

AC Charge

AC Charger
Actual charger image and charging
method may vary in accordance with the
charger manufacturer.
How to Connect AC Charger
1. Depress the brake pedal and apply the
parking brake.
2. Turn OFF all switches, shift to P (Park),
and turn OFF the vehicle.
If charging is initiated without the
gear in P (Park), the charging will start
after the gear is automatically shifted
to P (Park).
3. Open the charging door.
ONE1Q011045
For more details, refer to 'Electric
charging door' in this chapter.
If you cannot open the charging door due
to freezing weather, tap lightly or remove
any ice near the charging door. Do not try
to forcibly open the charging door.
4. Check if there is dust on the charging
connector and charging inlet.
5. Hold the charging connector handle
and connect it to the vehicle charging
inlet. Push the connector all the way
in. If the charging connector and
charging terminal are not connected
properly, this may cause a fire.
Locking Charging Cable
OLFP0Q4057N
Charging Connector Locking Mode' in the
infotainment system menu. The charging
connector is locked in the inlet at a
different period according to which mode
is selected.
Always mode : The connector locks
when the charging connector is plugged
into the charging inlet.
While charging mode : The connector
locks when charging starts.
For more details, refer to "Locking
Charging Cable" in this chapter.
Information
Information
01
ONE1Q011040
1-31