Table of Contents
Advertisement
Power Up
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert the 5V Power Adapter into an outlet, and then plug it into the
Power Jack on the back of the station. Next, remove the Insulation Tab
from the station's Battery Compartment.
3. Once the sensor is reading your stations, place it outside in a shaded
location to protect it from the sun's heat.
Watch our sensor mounting video:
Outdoor Sensor
TX141TH-Bv4
bit.ly/th_sensor_mounting
Weather Station
S74177
3
Advertisement
Table of Contents
