To assemble
2
Set the juicing bowl on the motor
housing.
Align the "
" mark on the motor housing and the
"
" on the juicing bowl.
3
Attach the rotating brush and filter,
then set it on the motor housing.
Align the "
" mark on the motor housing and
the "
" mark on the juice attachment.
Top view
4
Mount the squeezing screw.
I nsert the squeezing screw into the centre.
1
R otate the squeezing screw and push it
2
into the hole until it stops.
The lid cannot be closed if the squeezing
●
■
screw is not pushed down sufficiently.
Be careful not to get your finger clamped in
●
■
the gap between the squeezing screw and
the filter.
(
Frozen
attachment
①
●
)
②
●
EN13