4. Press the blue release button and remove the optical drive out of the front of
Figure 27. Removing the optical drive
5. Remove the retainer from the optical drive being replaced and install it on the
Figure 28. Installing the retainer for optical drive
6. Slide the new optical drive into the bay from the front until it snaps into
7. Connect the signal cable and the power cable to the new optical drive.
8. Go to "Completing the parts replacement" on page 45.
36
User Guide
the computer.
Note: There is a spare retainer 1 attached to the side of the upper drive cage.
new optical drive.
position.