Advertisement
►
You MUST have at least one existing key that already works with your vehicle in order to use the EZ
Installer™. If you have no working keys, return the Simple™ Key to the retailer where it was purchased.
►
The new keyblade MUST be cut before pairing. It can be cut at any local hardware store.
►
Vehicle battery should be in good condition and fully charged prior to pairing the new key. Turn off
headlights, radio, A/C fan, etc. to minimize battery draw during the process.
►
Do not use the EZ Installer™ while the vehicle is in motion. Unplug it from the OBD port before driving the
vehicle.
►
Only original remote features will work, regardless of buttons included on the Simple™ Key. This key does
not add remote features that your vehicle did not have before.
►
For your security, a tamper-evident security label is installed over the EZ Installer™ connector. If this label is
missing, damaged, or the word "VOID" appears on the EZ Installer™, please exchange this Simple™ Key for a
new one at the retailer where it was purchased.
►
Before pairing, familiarize yourself with the Simple™ Key's compatibility with the make, model, year, and
transponder chip for your vehicle on pages 4-5.
LET'S GET STARTED
Simple™ Key requires two steps: "KEY PAIRING" and "REMOTE PAIRING." Key pairing allows the new key to start your
vehicle. Remote pairing allows the key's remote functions to work. It is important to follow these steps in order to
successfully complete setup.
If you skip a step, the key WILL NOT work properly, and you will have to repeat the setup process.
Find your EZ Installer™ DIAL POSITION in the following chart by referencing your vehicle's make, model, year, and
transponder key (chip) type.
2
SIMPLE™ KEY USER GUIDE
IMPORTANT NOTES
Advertisement
