Advertisement
5.
Insert the original key, buttons facing down, and turn the ignition to the ON/RUN position. If there are no
markings, turn the key clockwise and stop just short of starting the engine.
a.
NOTE: It is important to make sure that you insert the key, buttons facing down, so that when you
turn the key to the ON/RUN position, buttons are facing up and easily visible and accessible for the
following steps.
6.
To continue, press and release the EZ Installer™ button.
7.
Wait and listen for 2 quick beeps from the EZ Installer™.
8.
On the key in the ignition, simultaneously press the LOCK and UNLOCK buttons on the remote. Then, press and release the
UNLOCK button.
NOTE: All other paired remotes will be erased.
a.
9.
If ERASE REMOTE is successful, you will hear 3 quick beeps from the EZ Installer™. Depending on the model, your vehicle
may also beep twice.
NOTE: If you do not hear beeps from the EZ Installer™ and/or your vehicle, an error may have occurred (see FAQs for
a.
more information). Repeat Step 8 again.
10.
If you need to pair keys, leave the EZ Installer™ plugged into the OBD port and continue to STEP 1 (of 1) KEY PAIRING.
SIMPLE™ KEY USER GUIDE
TOYOTA IGNITION POSITIONS
13
Advertisement
