Frequently Asked Questions; Fcc Regulatory Statements - Car Keys Express GMRM-MZ1RE User Manual

USER GUIDE

FREQUENTLY ASKED QUESTIONS

Q: Can I use the same EZ Installer on other vehicles?
A: No. The EZ Installer will be locked to the first vehicle it is used on. You may
add more remotes to the same vehicle again as needed, but it will not work on
different vehicles. If the EZ Installer sounds 3 beeps at 1 second intervals, and
then beeps rapidly, this signifies the device has already been used on another
vehicle. Visit CKESimpleKey.com or your local retailer to purchase additional
remotes.
Q: The new remote won't pair to my car. What should I do?
A: If the EZ Installer doesn't pair the remote to your car, most likely, an incorrect
dial position was used. In this case, the EZ Installer will beep continuously after
you press the pairing button. Check the compatibility section on pages 3-4
to confirm the correct dial position for your make, model, year, and button
configuration of your original remote. Remove the EZ Installer, turn the Ignition
off and try the pairing process from step 1. If the remote still won't pair, please
contact customer service at (888) 598-8910.
Q: The EZ Installer was unplugged during the pairing process. What should I do?
A: The EZ Installer must remain plugged into the on-board diagnostic (OBD)
port until pairing is complete. If the EZ Installer becomes unplugged during the
pairing process, turn the ignition to the OFF position, remove the key, and begin
the pairing process again.

FCC REGULATORY STATEMENTS

FCC ID: 2AOKM-GV1
47 CFR §15.19(a)(3) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
6