Table of Contents
Advertisement
3. Open the retaining clips.
4. Position the memory module over the memory connector. Make sure that the
Installing adapters
This section provides information and instructions for installing and removing
adapters. Your computer has three expansion slots for PCI adapters. One slot, used
for an AGP adapter, is available on some models. You can install an adapter up to
228 mm (9 inches) long in the AGP slot, PCI slot 2, or PCI slot 3. You can install an
adapter up to 200 mm (7.9 inches) long in PCI slot 1.
To install an adapter:
1. Remove the cover. See "Removing the cover" on page 11.
2. Remove the adapter slot cover for the appropriate expansion slot.
notch 1 on the memory module aligns correctly with the connector key 2 on
the system board. Push the memory module straight down into the connector
until the retaining clips close.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to "Replacing the cover and connecting the
cables" on page 25.
Chapter 1. Installing options
15
Advertisement
Table of Contents
