D-Link DIR-822 User Manual page 91

DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router
User Manual
Figure 77. The page for creating a new PPPoE connection. The IPv4 section.
Parameter
Obtain DNS server
addresses
automatically
Primary DNS /
Secondary DNS
When all needed settings are configured, click the APPLY button. In the simplified mode, after
clicking the button, the window for creating an additional connection opens.
If your ISP offers access to local services (e.g. audio and video resources), click the CREATE
CONNECTION button. On the page displayed, specify the parameters for the connection of the
Dynamic IPv4 or Static IPv4 type and click the APPLY button.
If you do not need to create an additional connection, click the SKIP button. In this case, the
Connections Setup / WAN page opens.
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS and
Secondary DNS fields are not available for editing.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Page 91 of 235
Configuring via Web-based Interface
Description