D-Link DIR-822 User Manual page 182

DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh Router
User Manual
To set a schedule for the IP filter rule, click the Set schedule icon (
to this rule. In the opened window, from the Rule drop-down list, select the Create rule value to
create a new schedule (see the Schedule section, page 204) or select the Select an existing one
value to use the existing one. Existing schedules are displayed in the Rule name drop-down list.
To enable the IP filter rule at the time specified in the schedule and disable it at the other time,
select the Enable rule value from the Action drop-down list and click the SAVE button.
To disable the IP filter rule at the time specified in the schedule and enable it at the other time,
select the Disable rule value from the Action drop-down list and click the SAVE button.
To edit a rule, select the relevant line in the table. In the opened window, change the needed
parameters and click the APPLY button.
To change or delete the schedule for a rule, click the Edit schedule icon (
corresponding to this rule. In the opened window, change the parameters and click the SAVE button
or click the DELETE FROM SCHEDULE button.
To remove a rule, select the checkbox located to the left of the relevant line of the table and click
the DELETE button (
). Also you can remove a rule in the editing window.
Page 182 of 235
Configuring via Web-based Interface
) in the line corresponding
) in the line