Table of Contents
Advertisement
-3's Real-Time Parts
5.
Lower (LWR). You
If you need select a Tone of another family, press another
Spil med 2 lyde på keyboardet (Dual) og [SPLIT]
Tone button and repeat the step 3.
6.
Press [EXIT] to leave the Tone selection page.
the
1. Tryk og hold [DUAL] nedtrykket for at se den valgte lyd.
Selecting Tones and Play Two Voices
Simultaneously (Dual)
"Tones". The BK-3
Displayet viser nu liste over lydfamilien som er valgt og den valgte lyd vises med
he two real-time
WR) whose field is
negativ skrift.
ons.
1.
Press and hold the [DUAL] button.
nstrumental
The following screen appears.
The sound selected for the Lower part is displayed in reverse.
2.
Press the [INC] or [DEC] button to select the desired Tone
2. Tryk [INC] eller [DEC] for at vælge en anden lyd på listen.
in the list.
MEMO
Tones can also be selected by simply pressing the [NUMERIC]
3. Du kan også vælge at bruge [UP] eller [DOWN] knapperne for at "bladre" i listen og
key and entering their number (p. 20).
3.
efterfølgende trykke [ENTER] når den ønskede lyd er fundet.
You can also use the [UP] or [DOWN] button to move the
cursor in the list and then press [ENTER] to select the Tone
4.
If you need select a Tone of another family, press another
4. Hvis du ønsker en lyd fra en anden lyd gruppe, tryk på en anden [TONE] knap og
Tone button and repeat the step 2.
5.
gentag punkt 2.
Press the [DUAL] button to activate the Lower part.
The [DUAL] button lights and Lower part plays full keyboard.
6.
Play the keyboard.
5. Tryk på [DUAL] for at aktivere Lower part. [Dual] knappen lyser og Lower part spiller
See "9. Favorite
You'll hear the sound of Lower and Upper part simultaneously.
sammen med Upper part over hele keyboardet.
7.
Press [EXIT] to leave the Tone selection page.
MEMO
6. Hvis [SPLIT] knappen aktiveres, så deles keyboardet op i 2 dele. Split-mode: Toner
If the Split function is active ([SPLIT] button lights) the notes to
Playing the BK-3's Real-Time Parts
other desired
the left of split point are played back by Lower part (p.19).
under splitpunktet bruges til at styre rytmeakkompagnementet og spille Lower part
Play Different Voices with the Left
The BK-3 is now in Split mode: note numbers below the split point
hvis denne er aktiv.
are used to transpose rhythm playback in real-time and to play the
Lower part (if it is active). Note numbers above the split point can
and Right Hands (Split)
be used to play melodies using the Upper part.
1.
Press the [SPLIT] button
The [SPLIT] button lights.
the [NUMERIC]
2.
n to move the
7.
Tryk på [DUAL] knappen for at aktivere lyden for Lower part. [DUAL] knappen lyser.
Press the [DUAL] button to activate the Lower part.
select the Tone.
The [DUAL] button lights.
e [ENTER] button.
3.
Play the keyboard.
8. Spil på Keyboardet.
The notes you play with your left hand sound the Lower part (LWR) ,
while the notes you play with your right sound the Upper part.
Using the 'Numeric' function to Select
Tones, Rhythms and Performances
The "Numeric" function can be used to enter the number of the Tone,
Rhythm or Performance memory you want to use, which is faster than
scrolling with the [UP] and [DOWN] buttons.
Below please find an example that shows you how to use the "NUMERIC"
function for selecting Tones.
In the following example, we will assign a different sound to the Upper
part.
20
1.
QUICK GUIDE
Press the TONE button that contains the instrumental
sound that you want to play.
Upper (UPP)
Lower (LWR)
C4 (default)
Split Point
19
MEMO
The default setting for the split point is note number 60 (C4).
You can change the split point to a different note (see "Split
Point" p. 47.
MEMO
By pressing and holding one of these buttons, you activate the
lock function for Tone selection, which means that Tones no
longer change when you select Performance memories (See
"Filtering Performance Memories Settings (Lock function)" p.
39).
For Tones, you can enter up to 4 digits. To select Tone 6, for instance,
simply pressing the [6] button is enough (the display will show
"0006").
NOTE
If you make a mistake, the quickest way to correct it is by
pressing the [0] button four times (to enter "0000") and then
restarting.
For Rhythms and Performance memories, up to 3 digits can be
entered.
NOTE
If you try to enter a higher number than possible for the current
item, a warning is displayed ("Tone doesn't exist" ).
4.
Press the [ENTER] button to confirm your entry.
The "Numeric" pop-up disappears and the display jumps to the
Tone (and family) you selected.
5.
Press the [EXIT] button to return to the main page.
Setting the volume of the real-time
parts (Upper and Lower)
The BK-3 provides an easy way to change the volume balance of the Upper
and Lower parts.
1.
Simultaneously press the [SPLIT] and [DUAL] buttons to
call up the "Parts Volume" page.
2.
Use the [UP] or [DOWN] button to select the UPP or LWR
Advertisement
Table of Contents
