Leica Digilux 3 User Manual page 93

Multi setting
1 Press
/ to select the picture to
print and then press
the number of prints.
DPOF SET MULTI
7
10
COUNT
SELECT
• The number of prints icon [
appears.
• Repeat the above procedure. (You
cannot set all the pictures at one time.)
• The number of prints can be set from
0 to 999. The DPOF print setting is
canceled when the number of prints is
set to [0].
2 Press [MENU/SET] twice to close
the menu.
To cancel all settings
1 Press
to select [YES] and then
press [MENU/SET].
CANCEL ALL DPOF
CANCEL ALL DPOF
PRINT SETTINGS?
SELECT
2 Press [MENU/SET] to close the
menu.
/ to set
B
1
8 9
12
11
DATE
1
DISPLAY
MENU
EXIT
]
YES
NO
MENU
SET
MENU
SET
To print the date
After setting the number of prints, set/
cancel printing with the recording date by
pressing [DISPLAY].
DPOF SET THIS
1
C
DATE
COUNT
SELECT
• The date print icon [
• When you go to a photo printing store for
digital printing, be sure to order the
printing of the date additionally if required.
• Depending on the photo printing store or
the printer, the date may not be printed
even if you set to print the date. For further
information, ask at your photo printing
store or refer to the operating instructions
for the printer.
• DPOF is an abbreviation of "Digital Print
Order Format". This feature allows you to
write print information to media and then
use the information on a DPOF-compliant
system.
• DPOF print setting is a convenient function
when printing pictures with a printer that
supports PictBridge (P100). The date
printing setting on the printer may take
priority over the date printing setting on the
camera. Check the date printing setting on
the printer also. (P100)
• It is necessary to delete all previous
DPOF print information made on other
equipment when setting DPOF print on
the camera.
• If the file is not based on the DCF standard,
the DPOF print setting cannot be set. DCF
is an abbreviation of "Design rule for
Camera File system".
Menu Settings
100 0001
-
1/19
DATE
1
DISPLAY
MENU
EXIT
] appears.
DATE
93