Leica Digilux 3 User Manual page 37

2 Rotate the shutter speed dial to
set the shutter speed.
B
: [2-60s/B] to [1000-4000]
S S
STANDARD STANDARD
WB WB
AUTO AUTO
ISO ISO
100 100
SINGLE SINGLE
• The mode becomes Shutter-priority AE
mode [ ].
• If the shutter speed dial is set to [2-60s/
B] or [1000-4000], press
the command dial
speed.
S
STANDARD STANDARD
WB WB
AUTO AUTO
ISO ISO
100 100
SINGLE SINGLE
• You can set from 1/2 of a second to
60 seconds in steps of [1/3 EV] if the
shutter speed dial is set to [2-60s/B].
• You can set from 1/1000th of a second
to 1/4000th of a second in steps of
[1/3 EV] if the shutter speed dial is set
to [1000-4000].
• If you set [DIREC. EX. COMP.] (P85) to
[ON], you cannot use the command
dial.
3 Take a picture.
1000 1000
- -
2 1 0 +1 +1 +2 +2
CUSTOM CUSTOM
NORMAL NORMAL
19 19
/ or rotate
to set the shutter
1000 1000
-2 -1 0 +1 +1 +2 +2
CUSTOM CUSTOM
NORMAL NORMAL
19 19
C
• When the flash is activated, the shutter
speed becomes slower than 1/160th of a
second regardless of the shutter speed
setting. (P60)
• If you press the shutter button fully when
the shutter speed is slow, the shutter
speed on the screen counts down.
• We recommend using a tripod when the
shutter speed is slow.
• If you press the shutter button halfway
when the exposure is not adequate, the
aperture value and the shutter speed turn
red. The aperture value and the shutter
speed flash in the viewfinder. (They do not
flash when the flash is activated.)
• When most of the subject is bright, such
as during fine weather or snow, the
recorded pictures may become dark. In
these cases, compensate the exposure
towards positive. (P40)
• The ISO sensitivity cannot be set to
[AUTO]. (The ISO sensitivity is
automatically set to [ISO100] when you
switch from [AUTO] to Shutter-priority AE.)
• You cannot set Slow sync. [
Slow sync./Red-eye reduction [
the built-in flash.
• When you use a lens with no aperture
ring, press [FUNC.1] and then rotate the
command dial to set the aperture.
Basic
] and
] on
37